Telcar® TL-4129

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPE
品牌 :	Telcar®
用途 :	耐候性密封条、通用、工业应用

Telcar® TL-4129 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Telcar® TL-4129 产品信息

基本信息
特性	Low Specific Gravity Sunlight Resistant Without Fillers 低密度光滑性光稳定流动性低润滑中等硬度紫外线吸收
用途	工业应用耐候性密封条通用
外观	清晰/透明
形式	粒子
加工方法	挤出注射成型

物理性能	额定值	单位制	测试方法
比重	0.888	g/cm³	ASTM D792
熔流率（熔体流动速率） (230°C/2.16 kg)	4.0	g/10 min	ASTM D1238

硬度	额定值	测试方法
肖氏硬度		ASTM D2240
邵氏 A, 1 秒, 注塑	65	ASTM D2240
邵氏 A, 5 秒, 注塑	63	ASTM D2240

弹性体	额定值	单位制	测试方法
拉伸应力			ASTM D412
横向流量 : 100%应变 ¹	2.08	MPa	ASTM D412
流量 : 100%应变 ²	2.93	MPa	ASTM D412
横向流量 : 300%应变 ³	3.46	MPa	ASTM D412
流量 : 300%应变 ⁴	4.34	MPa	ASTM D412
抗张强度 ⁵			ASTM D412
横向流量 : 断裂	9.60	MPa	ASTM D412
流量 : 断裂	5.93	MPa	ASTM D412
伸长率 ⁶			ASTM D412
横向流量 : 断裂	710	%	ASTM D412
流量 : 断裂	490	%	ASTM D412
撕裂强度 ⁷			ASTM D624
横向流量	37.1	kN/m	ASTM D624
流量	30.1	kN/m	ASTM D624
压缩永久变形 ⁸			ASTM D395B
23°C, 22 hr	18	%	ASTM D395B
70°C, 22 hr	87	%	ASTM D395B

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
料筒后部温度	199 到 210	°C
料筒中部温度	204 到 216	°C
料筒前部温度	210 到 221	°C
射嘴温度	216 到 227	°C
加工（熔体）温度	216 到 227	°C
模具温度	35.0 到 65.6	°C
注塑压力	1.38 到 6.89	MPa
注射速度	快速
背压	0.172 到 0.862	MPa
螺杆转速	50 到 120	rpm
垫层	3.81 到 25.4	mm

注射说明
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

挤出	额定值	单位制
料筒1区温度	193 到 204	°C
料筒2区温度	199 到 210	°C
料筒3区温度	204 到 216	°C
料筒5区温度	210 到 221	°C
口模温度	216 到 227	°C

挤压说明
螺杆转速30 - 100 rpm

备注
1 .	口模 C, 510 mm/min
2 .	口模 C, 510 mm/min
3 .	C 模具, 510 mm/min
4 .	C 模具, 510 mm/min
5 .	C 模具, 510 mm/min
6 .	口模 C, 510 mm/min
7 .	C 模具, 510 mm/min
8 .	类型 1

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服