Telcar® TL-2934F

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPE
品牌 :	Telcar®
用途 :	橡胶取代、电线护套、绝缘材料、电气/电子应用领域、电线电缆应用、电缆护套、连接器

Telcar® TL-2934F 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Telcar® TL-2934F 产品信息

基本信息
特性	高比重高密度良好的成型性能良好的着色性流动性低卤化耐日光性，720小时填充溴化中等硬度阻燃性
用途	电缆护套电气/电子应用领域电线电缆应用电线护套绝缘材料连接器橡胶取代
机构评级	UL 94
RoHS 合规性	RoHS 合规
外观	白色黑色黄色自然色
形式	粒子
加工方法	挤出注射成型

物理性能	额定值	单位制	测试方法
比重	1.30	g/cm³	ASTM D792
熔流率（熔体流动速率）	0.10	g/10 min	ASTM D1238

硬度	额定值	单位制	测试方法
肖氏硬度 (邵氏 A)	72		ASTM D2240

弹性体	额定值	单位制	测试方法
拉伸应力			ASTM D412
100%应变, 0.508 mm	3.03	MPa	ASTM D412
300%应变, 0.508 mm	4.48	MPa	ASTM D412
抗张强度 (断裂, 0.508 mm)	11.0	MPa	ASTM D412
伸长率 (断裂, 0.508 mm)	600	%	ASTM D412

老化	额定值	单位制	测试方法
空气中拉伸强度的变化率 (158°C, 168 hr)	7.0	%	ASTM D573
空气中极限伸长率的变化率 (158°C, 168 hr)	-11	%	ASTM D573
拉伸强度的变化率 (60°C, 168 hr, 在IRM 902油中)	-16	%	ASTM D471
极限伸长率的变化率 (60°C, 168 hr, 在IRM 902油中)	-13	%	ASTM D471

热性能	额定值	单位制	测试方法
连续使用温度	105	°C	ASTM D794
脆化温度	-47.0	°C	ASTM D746
RTI Elec	50.0	°C	UL 746
RTI	50.0	°C	UL 746

电气性能	额定值	单位制	测试方法
介电常数 (1 kHz)	2.60		ASTM D150

可燃性	额定值	单位制	测试方法
UL 阻燃等级			UL 94
1.5 mm, BK	V-1		UL 94
1.5 mm, NT, WT, YL	V-0		UL 94
极限氧指数	29	%	ASTM D2863

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
料筒后部温度	199 到 216	°C
料筒中部温度	213 到 221	°C
料筒前部温度	221 到 227	°C
射嘴温度	221 到 229	°C
加工（熔体）温度	221 到 229	°C
模具温度	25 到 66	°C
注塑压力	1.38 到 6.89	MPa
注射速度	中等偏快
背压	0.172 到 0.345	MPa
螺杆转速	50 到 100	rpm
垫层	3.81 到 25.4	mm

注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

挤出	额定值	单位制
料筒1区温度	193 到 210	°C
料筒2区温度	199 到 216	°C
料筒3区温度	213 到 221	°C
料筒4区温度	213 到 221	°C
料筒5区温度	221 到 227	°C
口模温度	221 到 229	°C

挤压说明
Screw Speed: 30 to 100 rpm

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服