Sarlink® TPV 10045B BLACK (PRELIMINARY DATA)

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPV
品牌 :	Sarlink® TPV
用途 :	汽车领域的应用、汽车外部零件、橡胶取代

Sarlink® TPV 10045B BLACK (PRELIMINARY DATA) 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Sarlink® TPV 10045B BLACK (PRELIMINARY DATA) 产品信息

基本信息
特性	Low Specific Gravity 低的压缩变形性低密度抗紫外线性能良好耐化学性良好耐热性，高润滑中等硬度
用途	汽车领域的应用汽车外部零件橡胶取代
RoHS 合规性	RoHS 合规
外观	黑色
形式	粒子
加工方法	注射成型

物理性能	额定值	单位制	测试方法
密度	0.920	g/cm³	ISO 1183

硬度	额定值	测试方法
肖氏硬度		ISO 868
邵氏 A, 5 秒, 挤塑	45	ISO 868
邵氏 A, 5 秒, 注塑	48	ISO 868

弹性体	额定值	单位制	测试方法
拉伸应力			ISO 37
横向流量 : 100%应变	2.00	MPa	ISO 37
流量 : 100%应变	1.20	MPa	ISO 37
拉伸应力			ISO 37
横向流量 : 断裂	2.90	MPa	ISO 37
流量 : 断裂	3.20	MPa	ISO 37
伸长率			ISO 37
横向流量 : 断裂	280	%	ISO 37
流量 : 断裂	450	%	ISO 37
撕裂强度 - 横向流量 ¹	14	kN/m	ISO 34-1
压缩永久变形			ISO 815
23°C, 22 hr	17	%	ISO 815
70°C, 22 hr	24	%	ISO 815
125°C, 70 hr	46	%	ISO 815

老化	额定值	单位制	测试方法
空气中拉伸强度的变化率 - 横向流量			ISO 188
135°C, 1008 hr	-10	%	ISO 188
100% 应变 135°C, 1008 hr	2.0	%	ISO 188
150°C, 168 hr	-15	%	ISO 188
100% 应变 150°C, 168 hr	-5.0	%	ISO 188
在空气中断裂时拉伸应力变化 - 横向流量			ISO 188
135°C, 1008 hr	-1.0	%	ISO 188
150°C, 168 hr	-10	%	ISO 188
空气中邵氏硬度的变化率			ISO 188
邵氏 A, 135°C, 1008 hr	2.0		ISO 188
邵氏 A, 150°C, 168 hr	0.0		ISO 188
体积变化 (125°C, 70 hr, 在IRM 903油中)	78	%	ISO 1817

充模分析	额定值	单位制	测试方法
表观粘度 (200°C, 206 sec^-1)	125	Pa·s	ASTM D3835

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
料筒后部温度	180 到 205	°C
料筒中部温度	180 到 205	°C
料筒前部温度	180 到 205	°C
射嘴温度	185 到 210	°C
加工（熔体）温度	185 到 210	°C
模具温度	10 到 55	°C
背压	0.100 到 1.00	MPa
螺杆转速	100 到 200	rpm

备注
1 .	B 方法，直角形试样（不割口）

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服