Sarlink® TPE OM-1150N

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPE
品牌 :	Sarlink® TPE
用途 :	汽车内部零件、汽车领域的应用、包覆成型、柔软触感应用、汽车电子

Sarlink® TPE OM-1150N 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Sarlink® TPE OM-1150N 产品信息

基本信息
特性	Without Fillers 抗紫外线性能良好可加工性，良好可粘结性良好粘结性流动性中等耐化学性良好中等密度中等硬度
用途	包覆成型汽车电子汽车领域的应用汽车内部零件柔软触感应用
RoHS 合规性	RoHS 合规
外观	不透明自然色
形式	粒子
加工方法	注射成型

物理性能	额定值	单位制	测试方法
比重	0.998	g/cm³	ASTM D792
熔流率（熔体流动速率） (200°C/5.0 kg)	15	g/10 min	ASTM D1238

硬度	额定值	测试方法
肖氏硬度		ASTM D2240
邵氏 A, 1 秒, 注塑 ¹	45	ASTM D2240
邵氏 A, 5 秒, 注塑 ²	55	ASTM D2240

弹性体	额定值	单位制	测试方法
拉伸应力 ³			ASTM D412
横向流量 : 100%应变	1.48	MPa	ASTM D412
流量 : 100%应变	1.65	MPa	ASTM D412
横向流量 : 300%应变	2.90	MPa	ASTM D412
流量 : 300%应变	3.27	MPa	ASTM D412
抗张强度 ⁴			ASTM D412
横向流量 : 断裂	5.67	MPa	ASTM D412
流量 : 断裂	5.87	MPa	ASTM D412
伸长率 ⁵			ASTM D412
横向流量 : 断裂	550	%	ASTM D412
流量 : 断裂	540	%	ASTM D412
压缩永久变形 ⁶			ASTM D395B
23°C, 22 hr	42	%	ASTM D395B
70°C, 22 hr	91	%	ASTM D395B

补充信息	额定值	单位制
Adhesion Strength - Cohesive Failure	51	N
Adhesion to ABS
Adhesion to PC
Adhesion to PC/ABS

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
干燥温度	60	°C
干燥时间	2.0 到 4.0	hr
料筒后部温度	138 到 188	°C
料筒中部温度	154 到 199	°C
料筒前部温度	154 到 216	°C
射嘴温度	154 到 221	°C
加工（熔体）温度	166 到 221	°C
模具温度	10 到 32	°C
注塑压力	1.38 到 5.52	MPa
注射速度	中等偏快
背压	0.172 到 0.862	MPa
螺杆转速	50 到 100	rpm
垫层	3.81 到 25.4	mm

注射说明
Moisture can degrade the material. Drying is suggested. This can be accomplished by placing the material in a desiccant dryer for 2 to 4 hours at140°F.

备注
1 .	老化 0 hr 在 23°C
2 .	老化 48 hr 在 23°C
3 .	C 模具, 510 mm/min
4 .	C 模具, 510 mm/min
5 .	C 模具, 510 mm/min
6 .	类型 1

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服