Sarlink® TPE ML-1180B BLK X (PRELIMINARY DATA)

注: 该材料由 TEKNOR APEX 厂家直供,厂家技术人员进行生产指导,提供正规出场报告,相关检测报告等。

种类 :TPE
品牌 :Sarlink® TPE
用途 : 汽车内部零件垫圈汽车领域的应用通用

Sarlink® TPE ML-1180B BLK X (PRELIMINARY DATA) 原厂PDF物性资料.pdf

 订购热线:021-58958519 13061808058(赵先生)

Sarlink® TPE ML-1180B BLK X (PRELIMINARY DATA) 产品信息
基本信息
特性
  • Sunlight Resistant
  • 高比重
  • 高密度
  • 流动性高
  • 填充
  • 硬度高
  • 紫外线吸收
用途
  • 垫圈
  • 汽车领域的应用
  • 汽车内部零件
  • 通用
外观
  • 黑色
形式
  • 粒子
加工方法
  • 注射成型
物理性能额定值单位制测试方法
密度 1.18g/cm³ISO 1183
熔流率(熔体流动速率) (190°C/2.16 kg)14g/10 minASTM D1238
硬度额定值单位制测试方法
肖氏硬度 ISO 868
    邵氏 A, 1 秒, 注塑 81ISO 868
    邵氏 A, 5 秒, 注塑 79ISO 868
    邵氏 A, 15 秒, 注塑 78ISO 868
弹性体额定值单位制测试方法
拉伸应力 1ISO 37
    横向流量 : 100%应变 2.55MPaISO 37
    流量 : 100%应变 3.40MPaISO 37
拉伸应力 2ISO 37
    横向流量 : 断裂 6.40MPaISO 37
    流量 : 断裂 6.30MPaISO 37
伸长率 3ISO 37
    横向流量 : 断裂 730%ISO 37
    流量 : 断裂 630%ISO 37
撕裂强度 4ISO 34-1
    横向流量 31kN/mISO 34-1
    流量 26kN/mISO 34-1
压缩永久变形 5ISO 815
    23°C, 22 hr 37%ISO 815
    70°C, 22 hr 53%ISO 815
    90°C, 70 hr 70%ISO 815
    125°C, 70 hr 95%ISO 815
老化额定值单位制测试方法
空气中拉伸强度的变化率 6ISO 188
    横向流量 : 110°C, 1008 hr -2.3%ISO 188
    流量 : 110°C, 1008 hr -8.6%ISO 188
    横向流量 : 100% 应变 110°C, 1008 hr 10%ISO 188
    流量 : 100% 应变 110°C, 1008 hr 17%ISO 188
    横向流量 : 125°C, 168 hr -2.5%ISO 188
    流量 : 125°C, 168 hr -12%ISO 188
    横向流量 : 100% 应变 125°C, 168 hr 8.4%ISO 188
    流量 : 100% 应变 125°C, 168 hr 16%ISO 188
在空气中断裂时拉伸应力变化 7ISO 188
    横向流量 : 110°C, 1008 hr -1.0%ISO 188
    流量 : 110°C, 1008 hr -11%ISO 188
    横向流量 : 125°C, 168 hr 1.0%ISO 188
    流量 : 125°C, 168 hr -13%ISO 188
空气中邵氏硬度的变化率 ISO 188
    支撐 A, 110°C, 1008 hr 81.1ISO 188
    支撐 A, 110°C, 1008 hr 92.2ISO 188
    支撐 A, 110°C, 1008 hr 102.8ISO 188
    支撐 A, 125°C, 168 hr 111.3ISO 188
    支撐 A, 125°C, 168 hr 122.7ISO 188
    支撐 A, 125°C, 168 hr 133.5ISO 188
充模分析额定值单位制测试方法
表观粘度 (200°C, 206 sec^-1)136Pa·sASTM D3835
补充信息额定值单位制测试方法
氙老化测试机 SAE J1885
    Delta E - 1250 kJ 0.100SAE J1885
    Delta E - 2500 kJ 0.400SAE J1885
法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.
注射额定值单位制
料筒后部温度 171 到 193°C
料筒中部温度 177 到 199°C
料筒前部温度 182 到 204°C
射嘴温度 188 到 210°C
加工(熔体)温度 188 到 210°C
模具温度 15.6 到 32.2°C
注塑压力 1.38 到 6.89MPa
注射速度 中等偏快
背压 0.172 到 0.345MPa
螺杆转速 50 到 100rpm
垫层 3.81 到 25.4mm
注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).
备注
1 .类型 1, 510 mm/min
2 .类型 1, 510 mm/min
3 .类型 1, 510 mm/min
4 .B 方法,直角形试样(不割口), 510 mm/min
5 .类型 A
6 .类型 1
7 .类型 1
8 .1 sec
9 .5 sec
10 .15 sec
11 .1 sec
12 .5 sec
13 .15 sec
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服