Sarlink® TPE ME-2655B (PRELIMINARY DATA)

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPE
品牌 :	Sarlink® TPE
用途 :	汽车领域的应用、汽车外部零件、橡胶取代、车窗封装

Sarlink® TPE ME-2655B (PRELIMINARY DATA) 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Sarlink® TPE ME-2655B (PRELIMINARY DATA) 产品信息

基本信息
特性	Low Specific Gravity 出色的外观低密度抗紫外线性能良好可加工性，良好良好粘结性流动性高耐化学性良好有弹性中等硬度
用途	车窗封装汽车领域的应用汽车外部零件橡胶取代
RoHS 合规性	RoHS 合规
外观	黑色
形式	粒子
加工方法	注射成型

物理性能	额定值	单位制	测试方法
密度	0.939	g/cm³	ISO 1183
熔流率（熔体流动速率） (190°C/2.16 kg)	6.4	g/10 min	ASTM D1238

硬度	额定值	测试方法
肖氏硬度		ISO 868
邵氏 A, 1 秒	60	ISO 868
邵氏 A, 5 秒	57	ISO 868
邵氏 A, 15 秒	55	ISO 868

弹性体	额定值	单位制	测试方法
拉伸应力			ISO 37
横向流量 : 100%应变	1.56	MPa	ISO 37
流量 : 100%应变	1.94	MPa	ISO 37
抗张强度			ISO 37
横向流量 : 断裂	10.5	MPa	ISO 37
流量 : 断裂	7.80	MPa	ISO 37
伸长率			ISO 37
横向流量 : 断裂	880	%	ISO 37
流量 : 断裂	770	%	ISO 37
撕裂强度
横向流量	23	kN/m	ISO 34
流量	23	kN/m	ISO 34-1
压缩永久变形			ISO 815
23°C, 22 hr	17	%	ISO 815
70°C, 22 hr	36	%	ISO 815
90°C, 70 hr	61	%	ISO 815

老化	额定值	单位制	测试方法
空气中拉伸强度的变化率 - 横向流量			ISO 188
110°C, 1008 hr	8.7	%	ISO 188
125°C, 168 hr	5.4	%	ISO 188
在空气中断裂时拉伸应力变化 - 横向流量			ISO 188
110°C, 1008 hr	3.4	%	ISO 188
125°C, 168 hr	1.4	%	ISO 188
空气中邵氏硬度的变化率			ISO 188
邵氏 A, 110°C, 1008 hr	1.3		ISO 188
邵氏 A, 125°C, 168 hr	2.1		ISO 188

补充信息	额定值	单位制	测试方法
Apparent Shear Viscosity - Capillary, 206 1/sec (200°C)	139	Pa·s	ISO 11443
Good adhesion to glass with primer

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
料筒后部温度	170 到 190	°C
料筒中部温度	175 到 195	°C
料筒前部温度	180 到 205	°C
射嘴温度	180 到 205	°C
加工（熔体）温度	180 到 205	°C
模具温度	15 到 40	°C
注塑压力	1.38 到 6.89	MPa
注射速度	中等偏快
背压	0.172 到 0.862	MPa
螺杆转速	50 到 100	rpm
垫层	3.81 到 25.4	mm

注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 176°F (80°C).

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服