Sarlink® TPE ME-2380-01 BLK 111

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPE
品牌 :	Sarlink® TPE
用途 :	耐候性密封条、汽车领域的应用、汽车外部零件、汽车外部装饰、把手、橡胶取代

Sarlink® TPE ME-2380-01 BLK 111 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Sarlink® TPE ME-2380-01 BLK 111 产品信息

基本信息
特性	Low Specific Gravity 低密度抗紫外线性能良好可加工性，良好良好粘结性耐化学性良好优良外观有弹性中等硬度
用途	把手耐候性密封条汽车领域的应用汽车外部零件汽车外部装饰橡胶取代
RoHS 合规性	RoHS 合规
外观	黑色
形式	粒子
加工方法	挤出注射成型

物理性能	额定值	单位制	测试方法
比重	0.898	g/cm³	ASTM D792
熔流率（熔体流动速率） (230°C/2.16 kg)	20	g/10 min	ASTM D1238

硬度	额定值	测试方法
肖氏硬度		ASTM D2240
邵氏 A, 1 秒	83	ASTM D2240
邵氏 A, 5 秒	80	ASTM D2240

弹性体	额定值	单位制	测试方法
抗张强度			ASTM D412
横向流量 : 断裂	12.7	MPa	ASTM D412
流量 : 断裂	6.69	MPa	ASTM D412
伸长率			ASTM D412
横向流量 : 断裂	850	%	ASTM D412
流量 : 断裂	640	%	ASTM D412
撕裂强度 - 横向流量	38.5	kN/m	ASTM D624
压缩永久变形			ASTM D395
23°C, 22 hr	31	%	ASTM D395
70°C, 257 hr	46	%	ASTM D395
125°C, 70 hr	87	%	ASTM D395

补充信息
Fogging, 3 Hrs @ 100C, 21C Plate = 96%

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
料筒后部温度	199 到 210	°C
料筒中部温度	204 到 216	°C
料筒前部温度	210 到 221	°C
射嘴温度	216 到 227	°C
加工（熔体）温度	216 到 227	°C
模具温度	35 到 66	°C
注塑压力	1.38 到 6.89	MPa
注射速度	快速
背压	0.172 到 0.862	MPa
螺杆转速	50 到 120	rpm
垫层	3.81 到 25.4	mm

注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

挤出	额定值	单位制
料筒1区温度	193 到 204	°C
料筒2区温度	199 到 210	°C
料筒3区温度	204 到 216	°C
料筒4区温度	204 到 216	°C
料筒5区温度	210 到 221	°C
口模温度	216 到 227	°C

挤压说明
Screw Speed: 30 to 100 rpm

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服