Sarlink® TPE ME-2365B (PRELIMINARY DATA)

注: 该材料由 TEKNOR APEX 厂家直供,厂家技术人员进行生产指导,提供正规出场报告,相关检测报告等。

种类 :TPE
品牌 :Sarlink® TPE
用途 : 汽车领域的应用汽车外部零件汽车外部装饰橡胶取代

Sarlink® TPE ME-2365B (PRELIMINARY DATA) 原厂PDF物性资料.pdf

 订购热线:021-58958519 13061808058(赵先生)

Sarlink® TPE ME-2365B (PRELIMINARY DATA) 产品信息
基本信息
特性
  • Low Specific Gravity
  • Sunlight Resistant
  • 低密度
  • 光稳定
  • 抗紫外线性能良好
  • 可加工性,良好
  • 快的成型周期
  • 良好粘结性
  • 流动性高
  • 耐化学性良好
  • 润滑
  • 优良外观
  • 中等硬度
用途
  • 汽车领域的应用
  • 汽车外部零件
  • 汽车外部装饰
  • 橡胶取代
RoHS 合规性
  • RoHS 合规
外观
  • 黑色
形式
  • 粒子
加工方法
  • 注射成型
物理性能额定值单位制测试方法
密度 0.890g/cm³ISO 1183
熔流率(熔体流动速率) (230°C/2.16 kg)15g/10 minASTM D1238
硬度额定值单位制测试方法
肖氏硬度 ISO 868
    邵氏 A, 1 秒, 注塑 69ISO 868
    邵氏 A, 5 秒, 注塑 65ISO 868
    邵氏 A, 15 秒, 注塑 64ISO 868
弹性体额定值单位制测试方法
拉伸应力 1ISO 37
    横向流量 : 100%应变 1.70MPaISO 37
    流量 : 100%应变 2.00MPaISO 37
拉伸应力 2ISO 37
    横向流量 : 断裂 10.5MPaISO 37
    流量 : 断裂 5.80MPaISO 37
伸长率 3ISO 37
    横向流量 : 断裂 880%ISO 37
    流量 : 断裂 710%ISO 37
撕裂强度 4ISO 34-1
    横向流量 28kN/mISO 34-1
    流量 27kN/mISO 34-1
压缩永久变形 5ISO 815
    23°C, 22 hr 24%ISO 815
    70°C, 22 hr 39%ISO 815
    90°C, 70 hr 63%ISO 815
老化额定值单位制测试方法
空气中拉伸强度的变化率 - 横向流量 6ISO 188
    110°C, 1008 hr -9.8%ISO 188
    100% 应变 110°C, 1008 hr 13%ISO 188
    125°C, 168 hr -11%ISO 188
    100% 应变 125°C, 168 hr 15%ISO 188
在空气中断裂时拉伸应力变化 - 横向流量 7ISO 188
    110°C, 1008 hr 1.3%ISO 188
    125°C, 168 hr -1.3%ISO 188
空气中邵氏硬度的变化率 8ISO 188
    邵氏 A, 110°C, 1008 hr 2.8ISO 188
    邵氏 A, 125°C, 168 hr 1.7ISO 188
充模分析额定值单位制测试方法
表观粘度 (200°C, 206 sec^-1)134Pa·sASTM D3835
法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.
注射额定值单位制
料筒后部温度 199 到 210°C
料筒中部温度 204 到 216°C
料筒前部温度 210 到 221°C
射嘴温度 216 到 227°C
加工(熔体)温度 216 到 227°C
模具温度 35 到 66°C
注塑压力 1.38 到 6.89MPa
注射速度 快速
背压 0.172 到 0.862MPa
螺杆转速 50 到 120rpm
垫层 3.81 到 25.4mm
注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).
备注
1 .类型 1, 510 mm/min
2 .类型 1, 510 mm/min
3 .类型 1, 510 mm/min
4 .B 方法,直角形试样(不割口), 510 mm/min
5 .类型 A
6 .类型 1
7 .类型 1
8 .5 sec
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服