Monprene® RG-18240 (PRELIMINARY DATA)

注: 该材料由 TEKNOR APEX 厂家直供,厂家技术人员进行生产指导,提供正规出场报告,相关检测报告等。

种类 :TPE
品牌 :Monprene®
用途 : 垫圈把手厨具外壳消费品应用领域牙刷柄橡胶取代食品包装玩具非特定食品应用盖子食品容器Cosmetic Packaging食品服务领域

Monprene® RG-18240 (PRELIMINARY DATA) 原厂PDF物性资料.pdf

 订购热线:021-58958519 13061808058(赵先生)

Monprene® RG-18240 (PRELIMINARY DATA) 产品信息
基本信息
特性
  • Low Specific Gravity
  • Without Fillers
  • 低密度
  • 可加工性,良好
  • 良好的着色性
  • 良好粘结性
  • 润滑
  • 食品接触的合规性
  • 硬度,低
用途
  • Cosmetic Packaging
  • 把手
  • 厨具
  • 垫圈
  • 非特定食品应用
  • 盖子
  • 食品包装
  • 食品服务领域
  • 食品容器
  • 外壳
  • 玩具
  • 橡胶取代
  • 消费品应用领域
  • 牙刷柄
机构评级
  • FDA 食品接触, 未评级
  • 欧洲 食品接触, 未评级
RoHS 合规性
  • RoHS 合规
外观
  • 半透明
  • 可用颜色
形式
  • 粒子
加工方法
  • 注射成型
物理性能额定值单位制测试方法
密度 0.890g/cm³ISO 1183
硬度额定值单位制测试方法
肖氏硬度 (邵氏 A, 5 秒)40ISO 868
弹性体额定值单位制测试方法
拉伸应力 ISO 37
    100%应变 1.19MPaISO 37
    300%应变 1.71MPaISO 37
抗张强度 (断裂)7.60MPaISO 37
伸长率 (断裂)900%ISO 37
压缩永久变形 ISO 815
    23°C, 22 hr 23%ISO 815
    70°C, 22 hr 40%ISO 815
充模分析额定值单位制测试方法
表观粘度 (200°C, 206 sec^-1)101Pa·sISO 11443
法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.
注射额定值单位制
料筒后部温度 120 到 160°C
料筒中部温度 160 到 230°C
料筒前部温度 180 到 230°C
射嘴温度 180 到 230°C
加工(熔体)温度 180 到 230°C
模具温度 15 到 50°C
注射速度 快速
背压 0.500 到 1.50MPa
螺杆转速 50 到 100rpm
垫层 3.00 到 25.0mm
注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 65°C (150°F).Low holding pressure is recommended
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服