Monprene® OM-12265-01 (PRELIMINARY DATA)

注: 该材料由 TEKNOR APEX 厂家直供,厂家技术人员进行生产指导,提供正规出场报告,相关检测报告等。

种类 :TPE
品牌 :Monprene®
用途 : 把手体育用品文具橡胶取代包覆成型柔软的把手电器用具动力/其它工具手机旋钮粘合

Monprene® OM-12265-01 (PRELIMINARY DATA) 原厂PDF物性资料.pdf

 订购热线:021-58958519 13061808058(赵先生)

Monprene® OM-12265-01 (PRELIMINARY DATA) 产品信息
基本信息
特性
  • Low Specific Gravity
  • 低密度
  • 光滑性
  • 光稳定
  • 抗紫外线性能良好
  • 可粘结性
  • 良好的成型性能
  • 良好粘结性
  • 流动性中等
  • 润滑
  • 中等硬度
用途
  • 把手
  • 包覆成型
  • 电器用具
  • 动力/其它工具
  • 柔软的把手
  • 手机
  • 体育用品
  • 文具
  • 橡胶取代
  • 旋钮
  • 粘合
RoHS 合规性
  • RoHS 合规
外观
  • 半透明
  • 自然色
形式
  • 粒子
加工方法
  • 多次注射成型
  • 注射成型
物理性能额定值单位制测试方法
比重 0.958g/cm³ASTM D792
熔流率(熔体流动速率) (190°C/2.16 kg)2.0g/10 minASTM D1238
硬度额定值单位制测试方法
肖氏硬度 ASTM D2240
    邵氏 A, 1 秒, 注塑 68ASTM D2240
    邵氏 A, 5 秒, 注塑 66ASTM D2240
弹性体额定值单位制测试方法
抗张强度 (断裂)6.21MPaASTM D412
伸长率 (断裂)600%ASTM D412
补充信息额定值
Adhesion to ABS
Adhesion to PC
Adhesion to PC/ABS
法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.
注射额定值单位制
干燥温度 60°C
干燥时间 2.0 到 4.0hr
料筒后部温度 188 到 216°C
料筒中部温度 188 到 216°C
料筒前部温度 188 到 216°C
射嘴温度 188 到 216°C
加工(熔体)温度 188 到 216°C
模具温度 16 到 32°C
注塑压力 1.38 到 5.52MPa
背压 0.172 到 0.862MPa
螺杆转速 50 到 100rpm
垫层 3.81 到 25.4mm
注射说明
Moisture can degrade the material. Drying is suggested. This can be accomplished by placing the material in a desiccant dryer for 2 to 4 hours at 140°F.
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服