Monprene® IN-22940D (PRELIMINARY DATA)

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPE
品牌 :	Monprene®
用途 :	垫圈、插头、消费品应用领域、橡胶取代、型材、旋钮、工业应用

Monprene® IN-22940D (PRELIMINARY DATA) 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Monprene® IN-22940D (PRELIMINARY DATA) 产品信息

基本信息
特性	Low Specific Gravity Without Fillers 低密度光稳定抗紫外线性能良好可加工性，良好良好的着色性良好粘结性流动性低耐化学性良好耐气候影响性能良好韧性良好硬度高有弹性
用途	插头垫圈工业应用橡胶取代消费品应用领域型材旋钮
RoHS 合规性	RoHS 合规
外观	黑色自然色
形式	粒子
加工方法	挤出注射成型

物理性能	额定值	单位制	测试方法
密度	0.900	g/cm³	ISO 1183
熔流率（熔体流动速率） (230°C/2.16 kg)	3.0	g/10 min	ASTM D1238

硬度	额定值	测试方法
肖氏硬度		ASTM D2240
邵氏 D, 1 秒, 注塑	42	ASTM D2240
邵氏 D, 5 秒, 注塑	40	ASTM D2240

弹性体	额定值	单位制	测试方法
拉伸应力 ¹			ASTM D412
横向流量 : 100%应变	7.60	MPa	ASTM D412
流量 : 100%应变	10.5	MPa	ASTM D412
横向流量 : 300%应变	8.21	MPa	ASTM D412
流量 : 300%应变	11.4	MPa	ASTM D412
抗张强度 ²			ASTM D412
横向流量 : 断裂	15.4	MPa	ASTM D412
流量 : 断裂 ³	16.6	MPa	ASTM D412
流量 : 断裂	12.5	MPa	ASTM D412
伸长率 ⁴			ASTM D412
横向流量 : 断裂	830	%	ASTM D412
流量 : 断裂 ⁵	690	%	ASTM D412
流量 : 断裂	460	%	ASTM D412
压缩永久变形 ⁶			ASTM D395B
23°C, 22 hr	53	%	ASTM D395B
70°C, 22 hr	89	%	ASTM D395B

充模分析	额定值	单位制	测试方法
表观粘度 (200°C, 206 sec^-1)	360	Pa·s	ASTM D3835

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
料筒后部温度	216 到 238	°C
料筒中部温度	216 到 238	°C
料筒前部温度	216 到 238	°C
射嘴温度	216 到 238	°C
加工（熔体）温度	216 到 238	°C
模具温度	16 到 32	°C
注塑压力	1.38 到 6.89	MPa
注射速度	中等偏快
背压	0.172 到 0.345	MPa
螺杆转速	50 到 100	rpm
垫层	3.81 到 25.4	mm

注射说明
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

挤出	额定值	单位制
料筒1区温度	204 到 227	°C
料筒2区温度	204 到 227	°C
料筒3区温度	204 到 227	°C
料筒4区温度	204 到 227	°C
料筒5区温度	204 到 227	°C
口模温度	204 到 227	°C

挤压说明
螺杆转速30 - 100 rpm

备注
1 .	C 模具, 510 mm/min
2 .	C 模具, 510 mm/min
3 .	Extruded tape
4 .	C 模具, 510 mm/min
5 .	Extruded tape
6 .	类型 1

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服