Medalist™ MD-12283 X (PRELIMINARY DATA)

注：该材料由 TEKNOR APEX 厂家直供，厂家技术人员进行生产指导，提供正规出场报告，相关检测报告等。

种类 :	TPE
品牌 :	Medalist®
用途 :	医疗/护理用品、药物

Medalist™ MD-12283 X (PRELIMINARY DATA) 原厂PDF物性资料.pdf

订购热线：021-58958519 13061808058(赵先生)

Medalist™ MD-12283 X (PRELIMINARY DATA) 产品信息

基本信息
特性	纯度高高压锅消毒环氧乙烷消毒抗伽马辐射可加工性，良好耐扭结无动物源性成分
用途	药物医疗/护理用品
机构评级	ISO 10993 Part 5 ISO 13485
外观	半透明
形式	粒子
加工方法	挤出

物理性能	额定值	单位制	测试方法
比重	0.888	g/cm³	ASTM D792
熔流率（熔体流动速率） (200°C/5.0 kg)	19	g/10 min	ASTM D1238

硬度	额定值	测试方法
肖氏硬度		ASTM D2240
邵氏 A, 1 秒	85	ASTM D2240
邵氏 A, 5 秒	83	ASTM D2240

弹性体	额定值	单位制	测试方法
拉伸应力			ASTM D412
50%应变	3.96	MPa	ASTM D412
100%应变	4.31	MPa	ASTM D412
300%应变	5.45	MPa	ASTM D412
抗张强度 (断裂)	15.7	MPa	ASTM D412
伸长率 (断裂)	760	%	ASTM D412
撕裂强度	49.6	kN/m	ASTM D624
压缩永久变形			ASTM D395
23°C, 22 hr	34	%	ASTM D395
70°C, 22 hr	49	%	ASTM D395

法律声明
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

法律声明

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

注射	额定值	单位制
料筒后部温度	149 到 171	°C
料筒中部温度	171 到 193	°C
料筒前部温度	193 到 227	°C
射嘴温度	193 到 227	°C
加工（熔体）温度	193 到 227	°C
模具温度	21.1 到 51.7	°C
背压	0.345 到 1.03	MPa
螺杆转速	50 到 100	rpm
垫层	3.56 到 25.4	mm

注射说明
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

挤出	额定值	单位制
料筒1区温度	171 到 188	°C
料筒2区温度	182 到 196	°C
料筒3区温度	185 到 204	°C
料筒5区温度	204 到 227	°C
口模温度	204 到 227	°C

挤压说明
螺杆转速30 - 100 rpm

在线客服

联系电话

021-58958519

13061808058(赵生)

微信客服