Chemlon® MDF863

注: 该材料由 TEKNOR APEX 厂家直供,厂家技术人员进行生产指导,提供正规出场报告,相关检测报告等。

种类 :PA6
品牌 :Chemlon®
用途 :

Chemlon® MDF863 原厂PDF物性资料.pdf

 订购热线:021-58958519 13061808058(赵先生)

Chemlon® MDF863 产品信息
基本信息
填料/增强材料
  • 玻璃纤维增强材料, 15% 填料按重量
添加剂
  • 冲击改性剂
  • 阻燃性 2
特性
  • 冲击改性
  • 耐低温冲击
  • 阻燃性
加工方法
  • 注射成型
物理性能额定值单位制测试方法
密度 1.36g/cm³ISO 1183
收缩率 10.80 到 1.6%内部方法
吸水率 (平衡, 23°C, 50% RH)1.6%ISO 62
机械性能额定值单位制测试方法
拉伸应力 60.0MPaISO 527-2
弯曲模量 2800MPaISO 178
弯曲应力 70.0MPaISO 178
冲击性能额定值单位制测试方法
悬壁梁缺口冲击强度 17kJ/m²ISO 180/A
热性能额定值单位制测试方法
热变形温度
    0.45 MPa, 未退火 > 200°CISO 75-2/B
    1.8 MPa, 未退火 > 190°CISO 75-2/A
电气性能额定值单位制测试方法
表面电阻率 1.0E+12ohmsIEC 60093
体积电阻率 1.0E+14ohms·cmIEC 60093
介电强度 (3.00 mm)20kV/mmIEC 60243-1
漏电起痕指数 300VIEC 60112
可燃性额定值单位制测试方法
UL 阻燃等级 UL 94
    1.50 mm, Teknor Apex test result V-1UL 94
    3.00 mm, Teknor Apex test result V-0UL 94
灼热丝易燃指数 (1.50 mm)960°CIEC 60695-2-12
极限氧指数 30%ISO 4589-2
补充信息
Due to the thermal sensitivity of flame retarded products steps should be taken to limit hold up time and temperature for the material. Additional care should be taken during any interruptions to routine production and during any purging procedures in order to minimise degradation of the product.
注射额定值单位制
干燥温度 80.0°C
干燥时间 20hr
料筒后部温度 245 到 280°C
料筒中部温度 245 到 280°C
料筒前部温度 245 到 280°C
加工(熔体)温度 245 到 280°C
模具温度 60.0 到 80.0°C
注射速度 快速
Back Pressure Low
Screw Speed Moderate
注射说明
No drying is necessary unless the material has been exposed to air for longer than three hours. The appearance of splash marks on the surface of mouldings indicates excessive moisture is present.
备注
1 .Mould shrinkage is significantly influenced by many factors including wall thickness, gating, moulding shape and processing conditions. The range values given are determined from specimen bar mouldings of 1.5mm to 4mm wall thickness. They are provided as a guide for comparison purposes only and no guarantee should be inferred from their inclusion. (Specimens measured in the dry state, 24 hours after moulding).
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服
在线客服
联系电话
021-58958519
13061808058(赵生)

微信客服