基本信息 | |
---|---|
填料/增强材料 |
|
添加剂 |
|
特性 |
|
加工方法 |
|
物理性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
密度 | 1.00 | g/cm³ | ISO 1183 |
熔流率(熔体流动速率) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
溶化体积流率(MVR) (230°C/2.16 kg) | 20.0 | cm³/10min | ISO 1133 |
收缩率 1 | 1.4 到 2.0 | % | 内部方法 |
机械性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
拉伸应力 (屈服) | 27.0 | MPa | ISO 527-2 |
拉伸应变 (屈服) | 10 | % | ISO 527-2 |
弯曲模量 | 1900 | MPa | ISO 178 |
弯曲应力 | ISO 178 | ||
3.5% 应变 | 42.0 | MPa | ISO 178 |
-- | 48.0 | MPa | ISO 178 |
弯曲应变 - at peak stress | 6.5 | % | ISO 178 |
冲击性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
悬壁梁缺口冲击强度 (23°C) | 3.5 | kJ/m² | ISO 180 |
热性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
热变形温度 | |||
0.45 MPa, 未退火 | 95.0 | °C | ISO 75-2/B |
1.8 MPa, 未退火 | 60.0 | °C | ISO 75-2/A |
电气性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
表面电阻率 | 1.0E+14 | ohms | IEC 60093 |
体积电阻率 | 1.0E+15 | ohms·cm | IEC 60093 |
漏电起痕指数 | 300 | V | IEC 60112 |
可燃性 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
灼热丝易燃指数 (1.50 mm) | 960 | °C | IEC 60695-2-12 |
注射 | 额定值 | 单位制 | |
---|---|---|---|
干燥温度 | < 60.0 | °C | |
料筒后部温度 | 170 到 220 | °C | |
料筒中部温度 | 180 到 220 | °C | |
料筒前部温度 | 190 到 220 | °C | |
加工(熔体)温度 | < 230 | °C | |
模具温度 | 30.0 到 70.0 | °C | |
注射速度 | 中等 | ||
螺杆转速 | 50 到 200 | rpm |
注射说明 |
---|
Back Pressure: Low Injection Pressure: High PP materials are not hygroscopic and drying should not normally be necessary.If surface moisture is present on the granules, drying is permissible but temperature should not exceed 60°C to avoid risk of agglomeration. |
备注 | |
---|---|
1 . | Mould shrinkage is significantly influenced by many factors including wall thickness, gating, component shape and moulding conditions. The range values stated were determined from specimen bar mouldings of 1.5mm to 4mm wall thickness. They are provided as a guide for comparison purposes only and no guarantee should be inferred from their inclusion. (Specimens measured 24 hours after moulding). |